MATHEMATICAL MODELING OF THE EFFECT OF BINDING CLAYS ON GAS PERMEABILITY OF SAND-CLAY MOLD MIXTURES
Keywords:
Bentonite, kaolin, gas permeability, sand-clay mold, compressive binding strength, mathematical model, LagrangeAbstract
This research examines the influence of varying amounts of binder clays on the gas permeability of sand-clay molds. The studies primarily focused on preparing mold compounds for low alloy steel casting. Additionally, a mathematical model was developed to describe the effect of binding clays on the gas permeability of the sand-clay molds.
References
Nozimjon Kholmirzaev, Bakhtiyor Kasimov, Bahodirjon Abdullayev, Asatov Sunnatillo, & Abdullaev Farrux. (2021). INCREASING THE LIFETIME OF TILLAGE MACHINE OF PLOWSHARES MADE STELL MADE BY FOUNDRY TECHNOLOGIES. JournalNX - A Multidisciplinary Peer Reviewed Journal, 7(11), 55–59. https://doi.org/10.17605/OSF.IO/QB5TF
Turakhodjaev, N., Kholmirzaev, N., Saidkhodjaeva, S., & Kasimov, B. (2021). Quality improvement of the steel melting technology in an electric arc furnace. ACADEMICIA: An International Multidisciplinary Research Journal, 11(7), 48-54.
Nosir, S., Nodir, T., Kamol, A., Nozimjon, K., & Nuritdin, T. (2022). Development of quality steel alloy liquidation technology. American Journal of Interdisciplinary Research and Development, 7, 74-83.
Kholmirzaev, N., Turakhodjaev, N., & Sadikova, N. (2023). Improvement of the Melting Technology of 35XГСЛ Brand Steel Alloy in An Electric ARC Furnace. Role of Exact and Natural Sciences During the Renaissance III, 60-64.
Turakhodjaev, N. (2022). Technology for cleaning non-metallic inclusions and gaseous pores in the process of liquefaction of steels in an electric arc furnace. European Multidisciplinary Journal of Modern Science, 4, 77-82.
Kholmirzaev, N., Abdullaev, F., Turakhodjaev, N., Akramov, M., & Makhamatmuratov, U. (2022). Development of Technology of Mading Shafts from 35XGCL Brand Steel Alloy.
Kholmirzaev, N., Turakhodjaev, N., Saidmakhamadov, N., Khasanov, J., Saidkhodjaeva, S., & Sadikova, N. (2023). Development of Technology of Making Shafts from Steel Alloy 35XGCL. Lecture Notes in Networks and Systems, 762 LNNS. https://doi.org/10.1007/978-3-031-40628-7_18
Kholmirzaev, N., Khasanov, J., Abdullayev, B., Saidkhodjaeva, S., Bektemirov, A., Sadikova, N., ... & Nurdinov, Z. (2024). Improving the technology of obtaining highquality castings from steel in sand-clay molds. In E3S Web of Conferences (Vol. 525, p. 03012). EDP Sciences.
Kholmirzaev, N., Turakhodjaev, N., Saidmakhamadov, N., Khasanov, J., Bektemirov, A., & Sadikova, N. (2024). Effects of titanium (Ti) contents on the wear resistance of low-alloy steel alloys. In E3S Web of Conferences (Vol. 525, p. 03003). EDP Sciences.
Nodir T. et al. Development of 280X29Nl Alloy Liquefaction Technology to Increase the Hardness and Corrosion Resistance of Cast Products //International Journal of Mechatronics and Applied Mechanics. – 2021. – Т. 154. – С. 2021.
Nosir S. et al. Development of technology for obtaining quality castings from steel alloys //Eurasian Journal of Engineering and Technology. – 2022. – Т. 5. – С. 135-138.
Nosir S. et al. Technology to Increase the Hardness and Resistance of High–Chromium White Cast Iron //European Multidisciplinary Journal of Modern Science. – 2022. – Т. 6. – С. 665 – 670.
Norkhudjayev, F. R., Mukhamedov, A. A., Djalolova, S. T., Ergashev, D. M., & Hudayberdiyev, O. R. (2020). Technological capabilities of application of thermocyclic processing (Tcp) tool steel. International Journal of Psychosocial Rehabilitation, 24(8), 1866-1874.
Norkhudjayev, F. R., Mukhamedov, A. A., & Ergashev, D. M. (2019). FEATURES OF THERMAL PROCESSING OF INSTRUMENTAL ALLOYED STEELS. Journal of Tashkent Institute of Railway Engineers, 15(2), 68-71.
