A Review on High Performance Concrete Using Industrial Wastes
Keywords:
industrial waste, aggregate, cement, concrete, Durability, Silica fume, Fly ashAbstract
The production of cement is responsible for around eight percent of the total carbon dioxide emissions that are generated across the globe, according to estimates. In addition, this procedure necessitates the use of a considerable quantity of raw materials, which leads to potentially detrimental effects on the environment. As a result of this, a significant amount of research is being conducted all over the world to study the possibilities of employing different by-products of industrial waste as replacements for cement in the production of concrete. This research is being carried out due to the fact that this is a consequence of the situation. Fly ash (FA), metakaolin (MK), silica fume (SF), and ground granulated blast furnace slag (GGBS) are some examples of possible industrial products that have the ability to function as cement substitutes in pervious concrete. Other examples are silica fume (SF) and fly ash (FA). Garbage has been incorporated into concrete in order to facilitate the disposal of waste items in a way that is not only safe but also economical. Not only does the use of waste materials contribute to the preservation of natural resources and dumping grounds, but it also contributes to the maintenance of a clean atmosphere throughout the whole process. To get the required characteristics of concrete, such as its strength, durability, and workability, it is essential to partly replace waste material in the concrete. This is done in order to achieve the desired features. The purpose of this article is to describe a number of waste elements that are used in the production of concrete, as well as the impact that these waste items have on the various features of concrete.
References
CONCRETE Microstructures, Properties and Materials, P. Kumar Mehta, Paulo J.M. Monteiro, McGraw Hill Education, 2006.
M. Iqbal Malik, Muzafar Bashir, Sajad Ahmad, Tabish Tariq, Umar Chowdhary, “Study of Concrete Involving Use of Waste Glass as Partial Replacement of Fine Aggregates”, IOSR Journal of Engineering (IOSRJEN) Vol. 3, Issue 7 (July. 2013), PP 08-13.
P.Krishna Prasanna, M.Kanta Rao, “Strength Variations in Concrete by Using E-Waste as Coarse Aggregate”, International Journal of Education and applied research, Vol. 4, Issue Spl-2, Jan - June 2014.
Dr. A.M. Pande and S.G.Makarande, “Effect of Rice Husk Ash on Concrete”, International Journal of Engineering Research and ApplicationsISSN: 2248-9622 Vol. 3, Issue 1, pp.1718-1723, January - February 2013.
Javed Ahmad Bhat, Reyaz Ahmad Qasab and A. R. Dar, “Machine Crushed Animal Bones as Partial Replacement of Coarse Aggregates in Lightweight Concrete”, ARPN Journal of Engineering and Applied Sciences, VOL. 7, NO. 9, September 2012.
Amarnath Yerramala, “Properties of concrete with eggshell powder as cement replacement” The Indian Concrete Journal, pp. 94-102, October 2014.
Deepak T.J., Albarra Elsayed, Noor Hassan, Chakravarthy N, Siow Yun Tong, Mithun B.M., “Investigation on Properties of Concrete with Palm Oil Fuel Ash as Cement Replacement”, International Journal of Scientific & Technology Research, Volume 3, ISSUE 1, JANUARY 2014.
Sumit A. Balwaik and S. P. Raut, “Utilization of Waste Paper Pulp by Partial Replacement of Cement in Concrete”, International Journal of Engineering Research and Applications, Vol. 1, Issue 2, pp.300-309.
Dr.A.S.Kanagalakshmi, J.Caroline Saro, V.Jayashree, “Impact of Using RHA and CD in Replacement of Cement for Mix”, International Journal of Computational Engineering Research, Vol. 05 Issue 02, February 2015.
Vijaya, S.M.R., Ramana, R.I.V., Madan, M.R.K. & Abibasheer, B. (2012) Durability of high performance concrete containing supplementary cementing materials using rapid chloride permeability test, Int. J. Structural & Civil Enginng Research, 1(1), 92–98.
Ramesh, K.G., Muthupriya, P.R.V. (2013) Experimental Investigation on Durability Characteristics of High Performance Concrete Using Mineral Admixtures, Int. J. Advanced Scientific and Tech. Research, 2(1), 239–251.
Deepa, A.S. (2012) Comparative mechanical properties of different ternary blended concrete. Indian J. Research, 1(10), 65– 69.
Ismael, Nadia & Baker, Mohammed. (2022). Using of Waste Materials for Production of High Performance Concrete +.
Youssef Lahzy, Eng Marcos. (2023). Ultra high-performance concrete using industrial waste performs mechanically and microstructurally. 10.13140/RG.2.2.17201.97126.
Anas AlKhatib, Mohammed Maslehuddin, Salah Uthman Al-Dulaijan, Development of high performance concrete using industrial waste materials and nano-silica, Journal of Materials Research and Technology,Volume 9, Issue 3,2020,Pages 6696-6711,ISSN 2238-7854.
B.D. Ikotun, S. Ekolu, Strength and durability effect of modified zeolite additive on concrete properties, Constr. Build. Mater. 24 (5) (2010) 749–757.
M. Sedlmajer, A. Hubácˇek, P. Rovnaníková, Properties of concretes with admixture of natural zeolite, Adv. Mater. Res. 1000 (2014) 106–109.
E. Vejmelková et al., Engineering properties of concrete containing natural zeolite as supplementary cementitious material: Strength, toughness, durability, and hygrothermal performance, Cem. Concr. Compos. 55 (2015) 259–267.
G. Girskas, G. Skripkiunas, G. Šahmenko, A. Korjakins, Durability of concrete containing synthetic zeolite from aluminum fluoride production waste as a supplementary cementitious material, Constr. Build. Mater. 117 (2016) 99– 106.
G. Asadollahfardi, B. Yahyaei, A.M. Salehi, A. Ovesi, Effect of admixtures and supplementary cementitious material on mechanical properties and durability of concrete, Civil Eng. Design (2020).
A. Dousti, R. Rashetnia, B. Ahmadi, M. Shekarchi, Influence of exposure temperature on chloride diffusion in concretes incorporating silica fume or natural zeolite, Constr. Build. Mater. 49 (2013) 393–399.
W. Wongkeo, P. Thongsanitgarn, A. Ngamjarurojana, A. Chaipanich, Compressive strength and chloride resistance of self-compacting concrete containing high level fly ash and silica fume, Mater. Des. 64 (2014) 261–269.
V. Kocˇí, M. Jerman, J. Madeˇra, R. Cˇerny´ , Effect of zeolite admixture on freeze/ thaw resistance of concrete exposed to the dynamic climatic conditions, Adv. Mater. Res. 982 (2014) 27–31.
Q. Wang, D. Wang, H. Chen, The role of fly ash microsphere in the microstructure and macroscopic properties of high-strength concrete, Cem. Concr. Compos. 83 (2017) 125–137.
B.B. Raggiotti, M.J. Positieri, Á. Oshiro, Natural zeolite, a pozzolan for structural concrete, Procedia Struct. Integrity 11 (2018) 36–43.
P.M. Zadeh, S.F. Saghravani, G. Asadollahfardi, Mechanical and durability properties of concrete containing zeolite mixed with meta-kaolin and micronano bubbles of water, Struct. Concr. 20 (2) (2019) 786–797.
C. Karakurt, _ I.B. Topçu, Effect of blended cements with natural zeolite and industrial by-products on rebar corrosion and high temperature resistance of concrete, Constr. Build. Mater. 35 (2012) 906–911.
G. Girskas, G. Skripkiunas, G. Šahmenko, A. Korjakins, Durability of concrete containing synthetic zeolite from aluminum fluoride production waste as a supplementary cementitious material, Constr. Build. Mater. 117 (2016) 99– 106.
